| 144” CMI 4-Color Flexographic Printer, 48” Repeat, Year 1996. Four (4) Belt and Shaft Driven Doctor Bladed Print Decks with 48” Repeat, Ceramic 146" 200LP-9BCM Anilox Rolls, Plate Rolls. Includes: S&S Dual Spindle Turret Unwind. Email for more Information |
|
| 116” Black Clawson Extrusion Coating Lamination Line with 125” Extruder with 6” Diameter Screw, Year 1998. 125-Inch Ultraflex Die with Manual Lip Adjustment. 120" PE Max Finished Width. Primary and Secondary Dual Spindle Unwinds, Lamination, Corona Treater, Drum Winder. Email for more Information |
|
| 130” Flexo Press, (3) Color Stack, 48” Repeat with Birch Winder, Year 1999. Includes 140” Powell Shaftless Floor Pick-up Unwind. Print Decks Equipped with Gear Drive System, 200 LP 9 BCM Anilox Rolls, Doctor Blade Print Chambers. Email for more Information |
|
| 78” Davis Standard Extrusion Coating Line, Year 2000. Features 80” Davis Standard H40C Autoflex Extruder; 190 MPM; Includes: Primary and Secondary Unwinds, Flynn Burner Preheating, AEC Blending, 80” Lamination Roll, Single Flexo Station, Tidland Slitters, Corona Treater, Drum Winder. Email for more Information |
|
| 88" Wolverine 3-Color Flexographic Printer, 120 MPM, 48" Repeat, Year 1996. Includes: (3) Print Decks with RetroFlex Doctor Blade Chambers, Ceramic 200LP-9BCM Anilox Rolls, and Gear Driven on a (4) Color Stack Frame. Email for more Information |
|
| 52" Davis Standard ER-WE-PA Tandem Coating Line with Two (2) 60” ERWEPA COEX Extruders, 4.5” Diameter Barrels; 52” Max Finished Width; 115 MPM Max Line Speed; Year 2008-2012. Email for more Information |
|
Immediately Available Slitter Rewinders |
|
| 204” Cameron 2-Drum Rewinder, 50” Rewind Diameter, 1550 FPM Operating Speed. Two (2) Unwinds: (i) 150” Shiftless Floor Pickup, and (ii) 150" Fixed Position Mandrel Type; Fife Web Guide; Slitting Station, Roll Kicker and Unloading Table. Email for more Information |
|
| 144” x 60” Black Clawson Shaftless 2-Drum Rewinder; Unwind:150” x 60” Diameter Shiftless Floor Pick-up; Automatic Web Guide, Fixed Blade Slitters, 1500 FPM Operating Speed, Rewind Roll Kicker with Roller Unloading Table. Drives and controls upgraded. Email for more Information |
|
| 116" x 60” Diameter Jagenburg Vari Dur Shaftless Two Drum Rewinder, 1500 FPM Operating Speed. Includes: Shear Slitting Section, Floor Pick-Up Unwind, J-Table Unloading. 60" Roll Diameter Max on Unwind / Rewind. Reinstalled Year 2002. Email for more Information |
|
| 64” Cameron 2-Drum Winder; 64” Cameron Floor Pick-up Unwind, 43” Max Diameter; 1000 FPM; Fife Web Guide; Formerly winding small diameter finished rolls; 75-200 GSM Non-Woven Materials. Email for more Information |
|
Auxiliary Plant Equipment |
|
| 72” Max Width Roll Storage Carousel. Capacity: (158) Rolls of Varying Widths, Year 2001. Carriages with Avg. load of 500 lbs. per carrier. Total weight capacity is 79,000 lbs. with a Max 677 lbs. per carriage. Retrieval Time (avg.): 4 minutes 3 seconds. Roll Widths: 48” – 72” Email for more Information |
|
| Regenerative Thermal Oxidizer - CLEANSWITCH® RTO Model CS-250 manufactured by Megtec, Capacity 37,000 CFM, Year 2003. Includes New York Blowers, and an on-machine skid mounted control room. Email for more Information |
|
| 60" High Performance Turret Unwind / Rewind Pair, 60" Diameter on Unwind / Rewind. Shaftless design. High speed flying splice. Drives and Controls included. Formerly used in film converting operation. Email for more Information |
|
| 60” Dual Spindle Turret Unwinds; 60” Diameter; Quantity (3); Capacity: 40,000 lbs.; Includes 60” Ultrasonic Flying Splice. Mfg. by Toko; Year 2000. Formerly used for film converting. Email for more Information |
|
| 62” Width x 50” Diameter Black Clawson Turret Unwind with Auto Splicing. The unwind is from a rotogravure coating line now out of operation. Includes Transfer Station for auto splicing. Email for more Information |
|
| 62” Width x 50” Diameter Black Clawson Turret Rewinder with Splicing. The rewinder is from a rotogravure coating line now out of operation. Includes Transfer Station for auto splicing. Email for more Information |
|
Gravure Coaters & Other Equipment |
|
| 72” Web Width Egan Offset Gravure Coater Station. Allows for flexibility in coating weights and applications. Manufactured in 1992. Two (2) Stations Available. With spare rolls. Email for more Information |
|
| 72” Web Width Egan Offset Gravure Coater Station. Allows for flexibility in coating weights and applications. Manufactured in 1992. Two (2) Stations Available. With spare rolls. Email for more Information |
|
| 72” Web Egan 4-Roll Chill Section or Hot Decurl Station. 4-Roll Assembly includes a single nip pull roll. Each of four rolls can be heated or chilled depending on the application. Part of decommissioned coater line. Manufactured by Egan, Year 1992. Email for more Information |
|
| 72” Web Egan Inline 2-Roll Calender Section currently on coater application. Two (2) Roll Steel to Steel Calender Assembly with Spare rolls. Calender Rolls are 24” and 16” diameters. Manufactured in 1992. Quantity (1). Email for more Information |
|
| 60” Rotogravure Coating Station. Manufactured by Black Clawson. The complete rotogravure coating line is intact and includes turret unwind / rewind, auto splice transfer station. Email for more Information |
|
| 58” Standex Rotary Metal Embosser. Standex Engraving Mark 250 SP Rotary Hydraulic Metal Embosser. Designed to Run as Sheet Fed or Continuous operation. 54" Maximum Material Width. Designed for Metal Embossing, Aluminum or Stainless Steel. The Embosser is a Stand-Alone Machine. Manufactured 2015. Like new condition. Email for more Information |
|
|
|
|