Falk Gear

300 HP Falk Gear Reducer Model: 2110Y1-S Ratio: 7.813 RPM: 1750 Type: REGULAR Configuration.

300 HP Falk Gear Reducer Model: 2110Y1-A Ratio: 7.813 RPM: 1750 Type: REGULAR Configuration.

300 HP Falk Gear Reducer Model: 2110Y1-S Ratio: 7.813 RPM: 1750 Type: REGULAR Configuration.

Falk Model 252-5EZ2-06A3 Gear Reducer. HP: 25; Ratio: 7.814; Input RPM: 230; Output RPM: 29.43; Type: Inline; S.F.: n/a. Notes: Class 2; MONumber 6585857; *

Falk Model 5C202A7 Gear Reducer. HP: 48.6; Ratio: 7.814; Input RPM: 1750; Output RPM: 230; Type: n/a; S.F.: 1. Notes: Mfg Date 3/79*

FALK Gearbox; HP: n/a; Model: 7GDX ; Ratio: 7.9; RPM In: 1170; RPM Out: 146.4; S.F.: 1.56

FALK Model 2060YB2-L Right Angle Gear Drive Ratio 8.188 Input Rpm 600 Output Rpm 73.3 Hp Rating 48.7 Service Factor 1.00 Approx Us Gallons 4.5

200 HP Falk Gear Reducer Model: 425A2-CB Ratio: 8.244 RPM: 1170 Type: REGULAR Configuration.

475 HP Falk Gear Reducer Model: 445A2-CB Ratio: 8.289 RPM: 1170 Type: REGULAR Configuration.

Falk Model PS20 Gear Reducer. HP: 75; Ratio: 8.3; Input RPM: 775; Output RPM: 93.37; Type: Parallel; S.F.: n/a. Notes: SerialNumber 1977; *

FALK Model 2090Y2-LD Reducer Ratio 8.405:1 Input 1235 Rpm Output 146.9 Rpm Service Rating 100 Hp Service Factor 2.82 5.8 Us Gallons

Falk Model 2090Y-2-B Gear Reducer. HP: 150; Ratio: 8.408; Input RPM: 1150; Output RPM: 136.82; Type: Parallel; S.F.: n/a. Notes: MONumber 7-966180-01; *

Falk Model 4203J09 Gear Reducer. HP: n/a; Ratio: 8.908; Input RPM: n/a; Output RPM: n/a; Type: ShaftMount; S.F.: n/a. Notes: 2 5/8" Hole x 1 3/8" Shaft*

193 HP Falk Gear Reducer Model: 2070FC2A Ratio: 8.996 RPM: 1750 Type: REGULAR Configuration.

100 HP Falk Gear Reducer Model: 7C Ratio: 9 RPM: - Type: REGULAR Configuration.

Falk Model 307JF09GS Gear Reducer. HP: n/a; Ratio: 9.211; Input RPM: n/a; Output RPM: n/a; Type: ShaftMount; S.F.: n/a. Notes: ShaftDiameter 2.125 in; ShaftLength 4.5 in; 6-688630 Mule Keyed Shaft FM-2.5" ID x 4.5" Deep Baur Splitter 2-2" Diameter Keyed and pin holed Shafts Casting #'s C.484178 For Screw Conveyor of Feeder for Refiner Goes With ID #18678

Falk Model 5E206A-4 Gear Reducer. HP: 25; Ratio: 9.248; Input RPM: 1750; Output RPM: 190; Type: Inline; S.F.: n/a. Notes: MO# 105447 w/ 15Motor 1755 Rpm 245T Frame 460 Volt TEFC*

125 HP Falk Gear Reducer Model: 75C Ratio: 9.25 RPM: - Type: REGULAR Configuration.

Falk Model 2307J09 Gear Reducer. HP: 25; Ratio: 9.255; Input RPM: n/a; Output RPM: n/a; Type: ShaftMount; S.F.: n/a. Notes:

Falk Model 4307J-09 Gear Reducer. HP: n/a; Ratio: 9.255; Input RPM: n/a; Output RPM: n/a; Type: ShaftMount; S.F.: n/a. Notes: #79-5671